Interior Fit-Out & Joinery
The timber detail that decides whether a room feels finished or merely built.
Built Against Your Walls, Not a Drawing
A fit-out only looks right when the pattern meets the corner cleanly. We set every wall out on site, against the actual room, and cut the timber to the space we find rather than the space the drawing promised.
We handle the whole element: the substrate, the timber, the concealed lighting channels and the final finish, so there is one team responsible when it is done.
- Solid hardwood rather than veneered board
- LED channels concealed inside the joinery
- Set out, fabricated and fixed by one team
What This Includes
Feature Walls
Hexagon, chevron, slatted, blocked and fluted patterns in solid hardwood.
Concealed Lighting
LED channels routed into the timber so the light washes the grain, not the room.
Column Cladding
Structural columns cased in hardwood with carved or laser-cut fretwork panels.
Floor Inlays
Chevron and herringbone hardwood runs set into tile or terrazzo floors.
Ceiling Detail
Slatted timber bulkheads, beams and dropped ceiling features.
Built-In Units
Reception counters, bars, display walls and fitted storage.
Materials & Finishes
We work in local and imported hardwoods, selected for grain and colour before cutting. Finishes range from natural oiled timber through to deep stained and lacquered surfaces.
- Solid hardwood boards and battens
- Natural, oiled, stained or lacquered finishes
- Laser-cut and hand-cut fretwork panels
- Warm-white concealed LED channel lighting
- Brass and stainless fixings and trims
Examples of This Work
Ideal For
Event halls and banquet venues
Where the walls are the backdrop to every photograph taken in the room.
Hotels and restaurants
Lobbies, corridors and dining rooms that need to feel considered.
Offices and receptions
A branded, built-in first impression instead of a painted wall.
Private homes
Living rooms, entrance halls and stairwells with a single striking feature.
Frequently Asked
Can you match a design from a photograph?
Yes, most of our fit-out work starts from a reference image. We produce a setting-out drawing showing how that pattern will work in your actual room, along with a price, before anything is cut.
Do you supply the lighting as well?
Yes. LED channels are built into the joinery as part of the fabrication, and we coordinate with your electrician for the final connection.
How much disruption is involved on site?
Most fabrication happens in the workshop. On-site work is fixing and finishing, which for a single feature wall is usually a few days.
Can you work alongside other contractors?
Yes, we regularly work in sequence with tiling, painting and electrical trades and will programme around them.
Have a Room That Needs Finishing?
Send us photographs and rough dimensions. We will tell you what it would take.